Ensuring the appropriate ventilation and blowing the boiler can significantly increase the efficiency of the furnace and thereby save us the cost of heating. So let's take the right fan for the stove.

By buying a furnace, we usually make complex purchases by providing themselves with all the necessary accessories. However, sometimes there is a need to replace, for example, the injection fan. Supposing that we have no special knowledge, we adhere to the principle of replacing equipment to another identical. However, we do not always get the desired effect in this way. Why?

Selection of fan for controller
If, in case of failure, we have no clear reasons for buying a new blower with greater power than the previous one, we almost always choose a device with a similar productivity. However, it happens that after connecting the fan the controller fails, which entails additional costs. To this not happen, pay attention to current consumption or measure it if the manufacturer does not indicate this value. It is also worth checking what current flows when stopping the impeller of the fan. After the measurement, compare it with the driver power. If it does not exceed the permissible current level, the joint work of both devices should be possible and efficient.

The most important parameters of the furnace blower
Choosing a discharge fan for a furnace, we focus primarily on its power. This is determined by the size of our furnace. The most common are the blowers with a capacity of about 70 W. Efficiency, that is, the amount of air passing through the device per hour is also extremely important. Weaker models reach 250 m 3 / h, more powerful - almost 300 m 3. / h. Standard speed, on the other hand, is about 2300 rpm. The most common temperature range in which fans can operate - from -10 ° C to + 40 ° C, which means that the equipment will work well both in the apartment and in cooler rooms. Depending on which slab is operated in which the plate is operated, its volume may be a very important parameter. Unfortunately, manufacturers often avoid explicitly indicating the noise level in decibels, instead of preferring unspecified slogans, such as "very quiet work". This is usually about 65 dB. However, if the furnace works in close proximity to the residential premises, it is worth studying this topic and find the corresponding parameter. Otherwise, a loud blower will make our life unpleasant.

Optional equipment
All sorts of dampers and valves that are equipped with floppers are designed to close the air supply when the device does not work. Thus, an uncontrolled temperature rise is prevented. Another good practice is to protect the engine correctly. Basically, it is a plastic cover that protects against dirt, but also prevents direct contact with moving parts. Thus, we avoid situations in which you could touch your finger to a running fan. This feature is especially important when there are small children at home. https://topcasinofinland.com/